If required, it is possible to install up to 10 electrical boxes in each panel (5 on one side and 5 on the other).
Luce Double
Wiring-ready sliding pocket door system for double door
OVERVIEW
FEATURES
Luce Double
Stud wall version
Insertion system for electric box (patented)
Self-centring door runner - solid wall
This is quickly applied directly to the counterframe with no need to drill the floor.
Vertical reinforced bars (solid wall version)
Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance in what would otherwise be a weak point in the counterframe where cracks in the plaster could begin to form, as it is the furthest point from the wall studs.
Adjustable rear door stop
Lets you change the door size without removing the door panel.
Protruding close plaster mesh
It joins the counterframe (50x25 mm) with the wall becoming an integral part of it, thus offering an increasing grasp of the laster. The finished wall won’t have faults.
Extractable track system (patented)
It is always possible to substitute worn mechanisms and to add accessories.
16 horizontal reinforcing bars
16 horizontal bars attached to the plasterholding mesh lends great resistance and rigidity to the counterframe, so that it can effectively counter the tension generated by brickwork and solid walls. Robustness is fundamental as the frame effectively replaces a portion of the wall. There are 32 bars with double leaf.
Stopped embossed metal sheet
Thickness 0.7 mm. The bosses are reliefs that prevent any deformation in the sheet. They are a guarantee of great robustness and rigidity.
Certified runners with ball bearings - Syntesis
They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.
Alignment bar (patented) - solid wall
As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.
Weld-free connection system (patented)
For joining the overboarding mesh to the counterframe: avoids the onset of rusting and potential detachment from the mesh.
Polystyrene joint
Located on the metal upper horizontal bar. It helps to absorb any movement in the structure.
Luce Double
Stud wall version
Self-centring door runner - stud wall
This is quickly applied directly to the counterframe with no need to drill the floor.
12 horizontal reinforcing bars
12 for the stud wall version made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage). There are 24 bars with double leaf.
Extractable track system (patented)
It is always possible to substitute worn mechanisms and to add accessories.
Vertical reinforced bars (stud wall version)
Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance to lateral pressures.
Certified runners with ball bearings
They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.
Adjustable door stop
One stops the door panel at 70 mm from the jamb in the opening phase, the other keeps the door tightly closed. The door stop can be adjusted at any time, even after installation, by simply extracting the track.
Metal upper bar
Horizontal bar made of metal (rather than wood or PVC) increases the robustness against increased load from above.
Channel for electrical wiring
Galvanised steel channel where to insert electrical wiring, equipped with earth cable.
Accessories
